No 230v indication / charging of leisure battery

[holti100]

Hi,

I've a Rimor Seal 12p, 2019 plate.

On my last trip I notice that the main indicator on my control panel (MHCP led) was not illuminated when connected to 230v on site. 230v sockets and fridge work ok via mains. The BC-520 also not having any LEDs on (orange or green). Battery is fully charge, I've checked all visible fuses and all appear to be ok. The floor power distributor (ePvL) central fuses all ok, the LED flashing green which appears to show system healthy?

Thanks in advance

Steve

[SimoneR]

Hello

If on charger the led not lamp, the problem is on it.

[RolfWilli]

Hallo



My leasure battery (lead) will not be charged on shore power 230 volts. There is a red led blinking on the BC 520 charger.

The battery ist more or less new and it will be charges by the DCC 850 by the alternator of the camper. But not with shore power. I checked the fuses, those I found (4 psc on the panel) are ok . Do you habe a recommendation for me what do do?



Regards



Rolf

[SimoneR]

Hello. Check the connections from BC-520 to our main board. If the connections are ok, try to connect 220V and disconnect service battery. In this case, the system must be work and (if you have all device off on motorhome) the led on battery charger must lamp green.