ArSilicii

Inviato: **29/04/2022, 23:49**

Hello,

I own a Rimor Katamarano equiped with AL120nb switch. I replaced the AGM batterie with a new one with same capacity (100Ah).

The battery never get fully charged. I have 100W solar panel and even after days connected to 230V, the control panel drops 1 bar once I switch a light on.

Is there any setting to input new battery nominal specs ?

Thanks

Jean-Philippe

Inviato: **30/04/2022, 10:47**

When all the LEDs are on, the battery voltage is about 13.8V. When you disconnect the 220V it is normal for the voltage to drop (this is the normal operation of the batteries) and therefore the first green LED on the control panel turns off.

ArSilicii

Set swtich after battery replacement

Set swtich after battery replacement

Re: Set swtich after battery replacement