Pagina 1 di 1
Arsicilli Al120NB battery capacity
Inviato: 25/11/2020, 19:14
da Sirtoscana
Good afternoon, I own a 2008 Ford Rimor Katamarano 8 motorhome, I currently have the AL120NB control unit installed, a 100W solar panel and a 100Ah AGM battery.
I want to put a new battery with a higher capacity and I wanted to know if I can put a battery with a higher capacity, from 200Ah to 300Ah.
Is there a problem? Would the control unit support a battery of that capacity?
another question
Can I install Gel or Lithium batteries (Lifepo4)
Thank you very much
Re: Arsicilli Al120NB battery capacity
Inviato: 25/11/2020, 23:44
da SimoneR
Hello. For lithium battery we suggest to see www.arsilicii.com/en/batteries.
We suggest to install max 200/250aH capacity.
Re: Arsicilli Al120NB battery capacity
Inviato: 26/11/2020, 16:43
da Sirtoscana
Thank you very much for your reply.
In the case of installing a 200Ah battery, do I have to put cables of more section from the AL120 control unit to the battery? and you have to put fuses of greater resistance?
Re: Arsicilli Al120NB battery capacity
Inviato: 27/11/2020, 7:32
da SimoneR
Hello. The power to charge the battery is almost the same. Ou can install about 50A from battery to the system.
Charging a larger battery only takes more time.
Re: Arsicilli Al120NB battery capacity
Inviato: 27/11/2020, 8:40
da Sirtoscana
Many thanks, greetings
Re: Arsicilli Al120NB battery capacity
Inviato: 11/11/2022, 12:44
da jaimed159
I am responding to this topic because I have a 2003 Ford Rimor and I have installed arsilicii al110s and have installed 2 GEL batteries NBA 3GL6E 6v 260Ah in series that make 12v output on arsilicii. batteries are being charged with a Victron SmartSolar 100/30 solar controller and 400w panel that charges.
what I want to ask is if when connecting 220v in park mode, the arsilicii charges correctly the batteries? because they are GEL type
Re: Arsicilli Al120NB battery capacity
Inviato: 11/11/2022, 22:49
da SimoneR
The charger have 10A output. This current is low to charge correctly your two battery. I suggest you to install a bigger charger (we have the 20A model full compatible with your system). To charge GEL battery you need to increase output voltage. You can increase it by a little trimmer inside charger. If you turn clockwise it you can increase output voltage. I suggest you to set it about 14,2V.
Re: Arsicilli Al120NB battery capacity
Inviato: 14/11/2022, 10:30
da jaimed159
where is the 20A model available?
to increase output voltage in 14.2 , where do i increase this voltage in my model?
can you show it in the manual?
tks
Re: Arsicilli Al120NB battery capacity
Inviato: 14/11/2022, 20:57
da SimoneR
Hello. Please send me an email at assistenza.tecnica@arsilicii.com and we send the info for increase output voltage and the price for 20A new charger.