No status from AL320 on the display
Inviato: 07/08/2019, 0:08
It looks like the communication between the display and the inverter is not working.
The inverter is still working (it charges the battery of the home-part) when connected to 230V. The motorbattery is not charged then but i can't select parralel
The display works also fine for the other parts (lights, pump, and level of watertanks)
Any idea wat might be wrong?
I tested the new fridge on 12V, then on gas. When i connected the 230V again, the problem occurred. System went down watervalve opened and display turned off.
Kind regards
F. Helmantel